Somma Tool, Co. - Blanks for Multiple Spindle Machines, Scribe-Chek Cutting Edge Gage, and Center Setting Gage

Item Number:

Blanks for Multiple Spindle Machines

Scribe-Chek Cutting Edge Gage

Center Setting Gage

RETURN TO PRODUCTS LISTING

Semi-Standard Circular Blanks
For Multiple Spindle Machines

AVAILABLE IN M2, M42, AND T15PM H.S.S. PRICES ON APPLICATION. SPECIFY QUANTITY, STYLE AND TYPE, WIDTH, MATERIAL AND HARD OR SOFT.

REAM AND COUNTERBORE STYLE	THREADED STYLE
Delivery: 2 Weeks (NOT RETURNABLE FOR CREDIT)
Available:

NBH STYLE	2-1/4" Dia. for New Britain
GH STYLE	2-3/8" Dia. for Greenlee
CH STYLE	3" Dia. for Cleveland
4H STYLE	3-1/2" Dia. for NBG, B&S & Cleveland
6H STYLE	4" Dia. for Brown & Sharpe

Semi-Standard Circular Blanks
With Side Teeth

AVAILABLE IN M2, M42, AND T15PM H.S.S. PRICES ON APPLICATION. SPECIFY QUANTITY, STYLE AND TYPE, WIDTH, MATERIAL AND HARD OR SOFT.

Delivery: 2 Weeks
(NOT RETURNABLE FOR CREDIT)

Available:

R1H STYLE	1-7/8" Dia. for Acme
R2H STYLE	2-3/8" Dia. for Acme
R3H STYLE	3" Dia. for Acme
R4H STYLE	3-3/8" Dia. for Acme

SCRIBE-CHEK CUTTING EDGE GAGE

Enjoy these Advantages:

No tool life lost in grinding. Tool can be properly sharpened the first time.

More correct pieces per grind.

No more costly "cut and try" tool sharpening.

Saves machine down time and operators’ time.

Even inexperienced operators can sharpen tools correctly. Just brush tool surface with steel blue, screw tool on gage, scribe through slotted ring (which can be set to any rake desired), and then grind to this line.

Sharpened edge can then be checked visually through the adjustable hair-line lens.

The
Simple, Accurate Method
for Sharpening
Circular Form Tools

Part No.	ITEM
SCK00-1 SCK0-1 SCK2-1 SCKDAV-1 SCK00-2 SCK0-2 SCK2-2 SCKDAV-2 SCK00-3 SCK0-3 SCK2-3 SCK2-3 SCK-4 SCK-5 SCK-6 SCK-7 SCK-8	Plate for SCK00 Plate for SCK0 Plate for SCK2 Plate for SCKDAV Stud for SCK00 Stud for SCK0 Stud for SCK2 Stud for SCKDAV Knob w/Set Screw for SCK00 Knob w/Set Screw for SCK0 Knob w/Set Screw for SCK2 Knob w/Set Screw for SCKDAV Hairline Lens-All Sizes Slotted Ring-All Sizes Blade-All Sizes Clamp Screw & Washer-All Sizes Chain and Rings-All Sizes

MACH. SIZE	CAT. NO.
#00 B&S	SCK00
#0 B&S	SCK0
#2 B&S	SCK2
DAVENPORT	SCKDAV

CENTER SETTING GAGE FOR B&S FORM TOOLS

Easy to set tools to center
No more cut and try
Save operator time
For front or rear slide
For forward or reverse rotation
For circular or dovetail tools

Once adjustable collar and bolt assembly is installed on tool post and set to center height, all that is necessary to set tool to center is to place the swing arm onto the adjustable collar and set cutting tool against setting gage. Swing arm setting gage can be moved from machine to machine.

SWING ARM SETTING GAGE (ONLY ONE REQUIRED FOR SEVERAL MACHINES)
MACH. SIZE	CAT. NO.
NO. 00	CSG-00
NO. 0	CSG-0
NO. 2	CSG-2

ADJUSTABLE COLLAR POST ASSEMBLY (ONE REQUIRED FOR EACH TOOL POST)
MACH. SIZE	CAT. NO.
NO. 00	CGP-00
NO. 0	CGP-0
NO. 2	CGP-2

TABLE OF BELOW-CENTER GASHING DISTANCE FOR VARIOUS

TOP RAKES ON CIRCULAR FORM TOOLS

To simplify tool sharpening, use our Scribe-Chek Cutting Edge Gage.

	No. 00 B&S	No. 0 B&S	No. 2 B&S	Davenport
Degree of	1-3/4" Dia.	2-1/4" Dia.	3" Dia.	2" Dia.
Top Rake	“A”	“A”	“A”	“A”
0	.125	.156	.250	.125
3	.170	.214	.327	.177
5	.200	.252	.378	.211
7	.230	.291	.428	.245
10	.273	.347	.503	.295
12	.302	.384	.552	.328
15	.345	.439	.624	.378