RESHARPENABLE QUICK CHANGE FORM TOOL INSERTS

Prices on application for inserts EDM'd to your part print.

Inserts can be resharpened by grinding material from top surface and reused without resetting.

Inserts can be resharpened 20 to 30 times.

Adaptable for "Datum Point" Applications.

Resharpenable

Insert

Spacer

RESHARPENABLE EDM READY BLANKS FOR THOSE

WITH EDM FACILITIES

• Inserts are ground 5/16" or 3/8" thickness only.

• Blanks oversize on width and length for EDMing.

• Blanks are recessed on back end for mounting in EDM fixture.

• For best results, inserts should be cut in Wire EDM Fixtures.

*Note: 5/16 x 3/4 blanks are used for 5/16 x 3/8 Inserts.

Also available in Maxamet High Speed Steel.