Somma Tool, Co. - QUICK CHANGE (THROWAWAY) FORM TOOL INSERTS

Item Number:

RETURN TO PRODUCTS LISTING

QUICK CHANGE (THROWAWAY) FORM TOOL INSERTS

Prices on application for inserts EDM'd to your part print.

For those who don't want to resharpen inserts but still want to enjoy advantages of "RQC" Holders.
Adaptable for "Datum Point Applications".

Throwaway

Insert

Back-Up

Anvil

EDM READY (THROWAWAY) BLANKS FOR THOSE

WITH EDM FACILITIES

Inserts are ground 1/8" thickness only.

Blanks oversize on width and length for EDMing.

Blanks are recessed on back end for mounting in EDM fixture.

For best results, inserts should be cut in Wire EDM Fixtures.

*Note: 1/8 X 3/4 blanks are used for 1/8 X 3/8 Inserts.

Also available in Maxamet High Speed Steel.

	INSERT SIZE - FOR FORM TOOLS
	*1/8 X 3/4	1/8 X 1-1/8	1/8 X 1-3/4-N	1/8 X 3/4	1/8 X 1-1/4	1/8 X 1-3/4	1-1/8 X 2-1/4	1/8 X 2-3/4
C2 MICRO	TA-.75MIC	TA-1.125MIC	TA-1.75MIC	TA-3/4MIC	TA-1.25MIC	TA-1.75MIC	TA-2.25MIC	TA-2.75MIC
C6 MICRO	TA-.75C6	TA-1.125-C6	TA-1.75-C6	TA-3/4C6	TA-1.25C6	TA-1.75-C6	TA-2.25C6	TA-2.75C6
76PM HSS	TA-.75-A	TA-1.125-A	TA-1.75-A	TA-3/4-A	TA-1.25-A	TA-1.75-A	TA-2.25-A	TA-2.75-A
MAXAMET	TA-.75-M	TA-1.125-M	TA-1.75-M	TA-3/4-M	TA-1.25-M	TA-1.75-M	TA-2.25-M	TA-2.75-M
ANVIL	BA-.75-3/16	BA-1.125-3/16	BA-1.75-3/16	BA-3/4-1/4	BA-1.25-1/4	BA-1.75-1/4	BA-2.25-1/4	BA-2.75-1/4