Item Number:

RETURN TO PRODUCTS LISTING 

Dovetail Form Tool Holders
for Davenport and Brown & Sharpe

Dovetail Form Tool Adapters 

Dovetail Form Tool Holder for Davenports
 FOR 1st POSITION SLIDE
Cat. No. DTH-DAV

 

• Extended outboard support eliminates tearing out of "T" slot of slide.
• Permits heavier cuts without chatter.
• Eccentric stud and pin adjustment to correct part taper.
• Support fits freely under oversize spindle.

1st POSITION DOVETAIL TOOL HOLDER PARTS

PART. NO.

CAT. NO.

1. PLATE

DTH-DAV-1

2. BODY

DTH-DAV-2

3. STUD

DTH-DAV-3

4. CLAMP

DTH-DAV-4

5. CLAMP SCREW

DTH-DAV-5

6. STUD SCREW

TT00-13

7. PIVOT PIN

CTP2-10

8. BOLT

00TPB-4

9. NUT & WASHER

00TBN

See Standard Dovetail Form Blanks to fit these and other holders.

FOR 2nd POSITION SLIDE

Cat. No.

  DTH-DVB

• Permits heavier cuts without chatter.
• Eccentric stud and pin adjustment to correct part taper.


See Standard Dovetail Form Blanks to fit these and other holders.

2nd POSITION DOVETAIL TOOL HOLDER PARTS

Part No.

Cat. No.

1. PLATE
2. BODY
3. TOP PLATE
4. CLAMP
5. STUD
6. STUD SCREW
7. PIVOT PIN
8. CLAMP SCREW
9. COVER SCREW
10. JACK SCREW
11. CAP SCREW
12. SQUARE NUT

DTH-DVB-1
DTH-DVB-2
DTH-DVB-3
DTH0-2
DTH-DAV-3
TH000-3
DTH-DVB-7
DTH2-7
TC0BH00-SCR
DTH-DVB-10
DTH-DVB-11
DTH-DVB-12

Universal Dovetail Tool Holder for Brown & Sharpe Machines
Illustration shows tool holder as it is used for forward rotation on front and rear slide.

 

TOOL NO.

MACH. SIZE

A

B

C

D

E

F

DTH00

#00 B&S

1"

.714

1-5/8

2-5/8

1-1/4

3/16

DTH0

#0 B&S

1-5/16

.951

2-1/8

3-3/8

1-1/2

1/4

DTH2

#2 B&S

1-7/16

1.250

2-17/32

3-15/16

2"

13/32

DTH2 with .951 dovetail available P.O.A.
• Designed for use on front or rear slide for either forward or reverse spindle rotation.
• Especially suited for heavy cuts or where design limitations of circular type tools do not permit grinding of side clearances.
• Swivel adjustment provided to correct for tapers.

See Standard Dovetail Form Blanks to fit these and other holders.

TOOL HOLDER PARTS

Part No.

DTH00
Cat. No.

DTH0
Cat. No.

DTH2
Cat. No.

1. Body
2. Clamp
3. Alignment Plate
4. Spacer
5. Bolt
6. Nut
7. Clamp Screw
8. Alignment Screw

DTH00-1
DTH00-2
DTH00-3
DTH00-4
00TPB-4
00TBN
ATT0-16
DTH00-8

DTH0-1
DTH0-2
DTH0-3
DTH0-4
0TPB-4
0TBN
DTH2-7
DTH2-8

DTH2-1
DTH2-2
DTH2-3
DTH2-4
2TPB-4
2TBN
DTH2-7
DTH2-8

Dovetail Form Tool Adapter for Turret Lathes and CNC Lathes

Dovetail Form Tool Adapter

FOR CNC LATHES TOO!

See Standard Dovetail Blanks  to fit these holders.

These Holders are designed to hold standard Dovetail Blanks in the flat tool post or 

square tool post of all Turret Lathes and CNC Lathes.

CAT. NO.

A

B

D/T

C

D

E

F

.75TLDTH

3/4 SQ.

3-1/2

.6995

1/4

1-1/4

1-1/4

1-1/4

1.0TLDTH

1" SQ.

4"

.951

1/4

1-3/4

1-1/2

1-1/2

1.25TLDTH

1-1/4 SQ.

4-1/2

.951

1/4

1-3/4

1-1/2

1-1/2

1.882TLDTH

1-1/4 SQ.

4-1/2

1.882

17/32

2"

3"

2"

 

DOVETAIL FORM TOOL ADAPTER PARTS

Part No.

.75TLDTH
Cat. No.

1.0TLDTH
Cat. No.

1.25TLDTH
Cat. No.

1.882TLDTH
Cat. No.

1. Body
2. Clamp
3. Clamp Scr.

.75TLDTH-1
.75TLDTH-2
DTH2-7

1.0TLDTH-1
1.0TLDTH-2
DTH2-7

1.25TLDTH-1
1.0TLDTH-2
1.25TLDTH-3

1.882TLDTH-1
1.882TLDTH-2
1.25TLDTH-3

 
 
  Telephone: [203] 753-2114

  Fax: [203] 756-5489

  Address: 109 Scott Road, Waterbury, CT, 06705, USA

  Electronic Mail:
    General Information: sales@sommatool.com
    Webmaster: webmaster@sommatool.com

  Site designed and managed by Group Somma..