Cam Blanks



Steel Cam Blanks

For lead, cross-slide and vertical attachment on automatic screw machines. Blanks are 1020 steel, with finished center hole, locating hole, graduated in hundredths and face ground and blued for easy scribing.
GROUND BOTH SIDES

STEEL FULL CAM BLANKS
MACHINE SIZE CAT. NO. DIA. WIDTH I.D.
No. 00
B&S
CB00-4.5 4-1/2 1/4 1"
CB00-5 5 1/4 1"
CB00-5.5 5-1/2 1/4 1"
No. 0
B&S
CB0-6 6 5/16 1-1/8
CB0-7 7 5/16 1-1/8
No. 2
B&S
CB2-7 7 3/8 1-1/4
CB2-8 8 3/8 1-1/4
CB2-9 9 3/8 1-1/4
CB2-10 10 3/8 1-1/4

Steel Rough Cam Blanks

Blanks are 1020 steel, with finished center hole and locating hole - but without graduations or bluing. Saving for cam makers who do not require these features. Face ground for scribing.

MACHINE SIZE CAT. NO. DIA. WIDTH I.D.
No. 00
B&S
RCB00-4.5 4-1/2 1/4 1"
RCB00-5 5 1/4 1"
RCB00-5.5 5-1/2 1/4 1"
No. 0
B&S
RCB0-6 6 5/16 1-1/8
RCB0-7 7 5/16 1-1/8
No. 2
B&S
RCB2-7 7 3/8 1-1/4
RCB2-8 8 3/8 1-1/4
RCB2-9 9 3/8 1-1/4
RCB2-10 10 3/8 1-1/4

CAMS SHOULD BE CARBURIZED AND DEEP CASE HARDENED FOR LONGEST LIFE.