Slotting Bushings


Slotting Bushings for Brown & Sharpe


SOMMA B&S REF. NO.
SB00-A

42-14598-99

SB00-D

42-6640-99

SB0-A

42-14600-99

SB2-A

42-14602-99

SB2-C

42-14603-99

SB22-A

42-14602-1

SB22-C

42-14603-1

  • TAPER SHANKS OF ALL BUSHINGS ARE GROUND
  • MADE OF C1117 STEEL
  • SHOULD BE CASE HARDENED .005" DEEP AFTER MACHINING FOR BEST RESULTS
Slotting Bushing Slotting Bushing Slotting Bushing Slotting Bushing Slotting Bushing
STYLE A --Standard Slotting Bushing with hole in shank.

STYLE B -- Same as Style "A", except WITHOUT hole in shank.
STYLE C -- Has larger head end to accommodate larger capacities of later model machines.

Maximum sizes bushings can pick up: #00 -- 7/16,#0 -- 5/8, #2 -- 3/4, #22 -- 7/8. (Note: The #00 size is also available with short shank. When ordering specify "#00 Style C -- SHORT SHANK")
STYLE D -- For use in later model H.S. #00 machines.

Same as Style "A", except with shortened shank to fit lighter swing arm of H.S. machines.
STYLE E -- Has same diameter head as Style C, except head length is longer, as follows:
#00 -- 5/8, #0 -- 3/4,
#2 -- 1", #22 -- 1-1/8.
STYLE F -- No. 00 only
Used for small work where the ejection slot in bushing would prevent effective holding.

 Machine

Size

Style A

Style B

Style C

Style C

Short

Style D

Style E

Style F

#00 B&S

SB00-A

SB00-B

SB00-C

SB00-C-S

SB00-D

SB00-E

SB00-F

#0 B&S

SB0-A

SB0-B

SB0-C

SB0-E

#2 B&S

SB2-A

SB2-B

SB2-C

SB2-E

#2 B&S*

SB22-A

SB22-B

SB22-C

SB22-E


* NOTE: SB22 Bushings are for #2B&S Automatic Screw Machines starting with Serial No. 542-2-3100.

Slotting Bushings Adapter






SIMPLIFIES machining of B&S Slotting Bushings.
GUARANTEES that all boring operations will be true with taper shank of the bushing.
ELIMINATES the need for indicating.

MACHINE
SIZE

CAT. NO.

SHANK
DIA.

LENGTH

#00

SBA00

1/2"

1-3/4"

#0

SBA0

5/8"

1-7/8"

#2

SBA2

3/4"

2"

#2

SBA22

7/8"

2"