Cat. V-Flange Endmill Adapters









  • TAPER IS HELD TO AN ACCURACY OF AT -3 OR BETTER AND IS GROUND AFTER BLACK-OXIDE. NON-CRITICAL OXIDED FOR RUST RESISTANCE.
  • KNURLED NOSE FOR ADDED SAFETY.
  • COMPLETE SELECTION OF RETENTION STUDS AVAILABLE.
  • OVER-TIGHTENING SET SCREW CAN CREATE RUNOUT.
** THIS STUB LENGTH DESIGN DEVIATES FROM ANSI STANDARD (B5.50-1994) TO FACILITATE USE IN SOME SHORT Z-AXIS MACHINING CENTERS. THESE ADAPTERS ACCEPT SINGLE-ENDED END MILLS ONLY.

* ADAPTERS WITH TWO SET SCREWS WILL ACCEPT SINGLE-ENDED END MILL ONLY.

*ALSO AVAILABLE WITH METRIC I.D.'S.

  40 V-SHANK 50 V-SHANK

C

CAPACITY

L

 CAT. NO.

 L

 CAT. NO.

1/8

1/8

1.38

4.50

CV40ZEM012138**

CV40EM012450

 

 

 

 

3/16

3/16

3/16

1.38

2.50

4.50

CV40ZEM018138**

CV40EM018250

CV40EM018450

2.50

4.50

6.50

CV50EM018250

CV50EM018450

CV50EM018650

1/4

1/4

1/4

1.38

2.50

4.50

CV40ZEM025138**

CV40EM025250

CV40EM025450

2.50

4.50

6.50

CV50EM025250

CV50EM025450

CV50EM025650

5/16

5/16

5/16

1.38

4.50

 

CV40ZEM031138**

CV40EM031450

 

2.50

4.50

6.50

CV50EM031250

CV50EM031450

CV50EM031650

3/8

3/8

3/8

3/8

1.38

2.50

 4.50

 6.50

CV40ZEM038138**

CV40EM038250

CV40EM038450

CV40EM038650

2.50

4.50

6.50

8.50

CV50EM038250

CV50EM038450

CV50EM038650

CV50EM038850

7/16

7/16

1.75

4.50

CV40ZEM044175**

CV40EM044450

2.50

 

CV50EM044250

 

1/2

1/2

1/2

1/2

1.75

2.62

4.62

6.62

CV40ZEM050175**

CV40EM050262

CV40EM050462

CV40EM050662

2.62

4.62

6.62

8.50

CV50EM050262

CV50EM050462

CV50EM050662

CV50EM050850

5/8

5/8

5/8

1.75

3.75

5.75

CV40ZEM062175**

CV40EM062375

CV40EM062575

3.75

5.75

7.75

CV50EM062375

CV50EM062575

CV50EM062775

3/4

3/4

3/4

3/4

1.75

3.75

5.75

 

CV40ZEM075175**

CV40EM075375

CV40EM075575

 

3.75

5.75

7.75

10.0

CV50EM075375

CV50EM075575

CV50EM075775

CV50EM0751000

7/8

7/8

7/8

1.75

4.00

6.00

CV40ZEM088175**

CV40EM088400

CV40EM088600

3.75

5.75

7.75

CV50EM088375

CV50EM088575

CV50EM088775

1"

1"

1"

1"

1.75

4.00

6.00

 

CV40ZEM100175**

CV40EM100400

CV40EM100600

 

4.00

6.00

8.00

10.0

CV50EM100400

CV50EM100600

CV50EM100800

CV50EM1001000

1-1/4

1-1/4

1-1/4

1-1/4

2.00

4.25

6.25

 

CV40ZEM125200**

CV40EM125425*

CV40EM125625

 

4.00

6.00

8.00

10.0

CV50EM125400*

CV50EM125600*

CV50EM125800*

CV50EM1251000

1-1/2

1-1/2

1-1/2

4.62

6.62

 

CV40EM150462*

CV40EM150662

 

4.00

6.00

8.00

CV50EM150400*

CV50EM150600*

CV50EM150800*

2"

2"

2"

 

 

 

 

 

 

5.62

7.62

9.62

CV50EM200562*

CV50EM200762*

CV50EM200962*