Solid Carbide 45º Chamfer Tools
Grade C2 Carbide

* (6) 9/64 dia. pinholes thru 3/16 steel hub only
  • Finish ground all over.
  • "U" shape gash, sharpened for right or left hand cutting.
  • The construction of these tools is the same as our Solid Carbide Circular Blanks with a steel center hub for clamping to tool post.

CAT. NO.

MACHINE
SIZE

A

B

C

DIA.

CENTER
HOLE

0045C2-SC

#00 B&S

7/64

.025

1/4

1-3/4

3/8-16 THD.

045C2-SC

#0 B&S

1/8

.040

5/16

2-1/4

1/2-13 THD.

245C2-SC

#2 B&S

5/32

.050

3/8

3"

5/8-11 THD.

D45C1-SC

DAV.

7/64

.025

1/4

2"

9/16 REAM*



Circular Chamfer & Face-Off Tools

  • Designed for chamfering the back end of the completed part and the front end of following part prior to cutting off in between.
  • These tools are available with the flat in the center of the tool or offset which has the flat closer to the spindle side of the tool to allow working close to the spindle.
  • Carbide tipped tools are supplied for right hand cutting, for left hand cutting add -L to the part num ber listed. All other choices have a "U" shaped gash for cutting in either direction.
  • Available with side pinholes
  • Side clearance ground

45° Double Chamfer Tools for B&S




            3-LIP C2 SOLID C2
MACHINE     M2 T15PM CARB TIPPED CARBIDE
SIZE A B C PART# PART# PART# PART#
#00 1/16 .025 1/4 0045C1 0045C1V 0045C1-CT  
7/64 .025 1/4 0045C2 0045C2V 0045C2-CT 0045C2-SC
#0 3/32 .040 5/16 045C1 045C1V 045C1-CT  
1/8 .040 5/16 045C2 045C2V 045C2-CT 045C2-SC
#2 7/64 .050 3/8 245C1 245C1V 245C1-CT  
5/32 .050 3/8 245C2 245C2V 245C2-CT 245C2-SC

30° Double Chamfer Tools for B&S




            3-LIP C2
MACHINE     M2 T15PM CARB TIPPED
SIZE A B C PART# PART# PART#
#00 1/16 .025 1/4 0030C1 0030C1V 0030C1-CT
7/64 .025 1/4 0030C2 0030C2V 0030C2-CT
#0 3/32 .040 5/16 030C1 030C1V 030C1-CT
1/8 .040 5/16 030C2 030C2V 030C2-CT
#2 7/64 .050 3/8 230C1 230C1V 230C1-CT
5/32 .050 3/8 230C2 230C2V 230C2-CT

30° / 45° Chamfer Tools for B&S




MACHINE       M2 T15PM
SIZE A B C PART# PART#
#00 5/64 .025 1/4 00C3045 00C3045V
#0 3/32 .040 5/16 0C3045 0C3045V
#2 7/64 .050 3/8 2C3045 2C3045V

60° Double Chamfer Tools for B&S




MACHINE       M2 T15PM
SIZE A B C PART# PART#
#00 1/16 .025 1/4 0060C1 0060C1V
7/64 .025 1/4 0060C2 0060C2V
#0 3/32 .040 5/16 060C1 060C1V
1/8 .040 5/16 060C2 060C2V
#2 7/64 .050 3/8 260C1 260C1V
5/32 .050 3/8 260C2 260C2V

Face-Off Tools for B&S




45° FACE-OFF TOOLS are intended for facing the end of the bar, necking, or forming large 45° chamfers.

          3-LIP C2
MACHINE   M2 T15PM CARB TIPPED
SIZE A B PART# PART# PART#
#00 .025 1/4 00F45 00F45V 00F45-CT
#0 .040 5/16 0F45 0F45V 0F45-CT
#2 .050 3/8 2F45 2F45V 2F45-CT