Endmills, Roughing, Solid Carbide





Uncoated* Single End Square with 4 Flutes
* For coating options, see listings at the bottom of this page

Diameter Flute Length Overall Length Uncoated Part#
4-Flute
1/8" 3/8" 1-1/2" EMRC-1/8
3/16" 5/8" 2" EMRC-3/16
1/4" 3/4" 2-1/2" EMRC-1/4
1/4" 1-1/8" 3" EMRC-1/4-3L
1/4" 1-1/2" 4" EMRC-1/4-4L
5/16" 3/4" 2-1/2" EMRC-5/16
5/16" 1-1/4" 3" EMRC-5/16-3L
5/16" 1-5/8" 4" EMRC-5/16-4L
3/8" 1" 2-1/2" EMRC-3/8
3/8" 1-1/4" 3" EMRC-3/8-3L
3/8" 1-3/4" 4" EMRC-3/8-4L
7/16" 1" 3" EMRC-7/16
7/16" 2" 4" EMRC-7/16-4L
1/2" 1-1/4" 3" EMRC-1/2
1/2" 2" 4" EMRC-1/2-4L
1/2" 3" 6" EMRC-1/2-6L
5/8" 1-1/4" 3-1/2" EMRC-5/8
5/8" 2-1/4" 5" EMRC-5/8-5L
5/8" 3" 6" EMRC-5/8-6L
3/4" 1-1/2" 4" EMRC-3/4
3/4" 2-1/4" 5" EMRC-3/4-5L
3/4" 3" 6" EMRC-3/4-6L
1" 1-1/2" 4" EMRC-1
1" 2-1/4" 5" EMRC-1-5L
1" 3" 6" EMRC-1-6L

* For coated endmills, add the appropriate designation shown below to the end of the part numbers listed above;

-TICN High abrasion resistance, lower friction and 80% harder than TIN coating but with a lower temperature threshold. Can provide 2 to 4 times the tool life over TIN.

-ALTIN Has the highest temperature resistance while maintaining a high degree of surface hardness. Best choice for dry machining. A good choice for titanium & stainless alloys, inconel, and cast iron.