Endmills, Solid Carbide


Endmills, Solid Carbide


Uncoated* Single End Square with 2, 3 or 4 Flutes
* For coating options, see listings at the bottom of this page

Diameter Flute Length Overall Length Uncoated Part#
2-Flute
Uncoated Part#
3-Flute
Uncoated Part#
4-Flute
1/64" 1/16" 1-1/2" EMC2-1/64 EMC3-1/64 EMC4-1/64
1/32" 3/32" 1-1/2" EMC2-1/32 EMC3-1/32 EMC4-1/32
3/64" 1/8" 1-1/2" EMC2-3/64 EMC3-3/64 EMC4-3/64
1/16" 3/16" 1-1/2" EMC2-1/16 EMC3-1/16 EMC4-1/16
5/64" 1/4" 1-1/2" EMC2-5/64 EMC3-5/64 EMC4-5/64
3/32" 3/8" 1-1/2" EMC2-3/32 EMC3-3/32 EMC4-3/32
7/64" 3/8" 1-1/2" EMC2-7/64 EMC3-7/64 EMC4-7/64
1/8" 1/2" 1-1/2" EMC2-1/8 EMC3-1/8 EMC4-1/8
9/64" 9/16" 2" EMC2-9/64 EMC3-9/64 EMC4-9/64
5/32" 9/16" 2" EMC2-5/32 EMC3-5/32 EMC4-5/32
11/64" 9/16" 2" EMC2-11/64 EMC3-11/64 EMC4-11/64
3/16" 5/8" 2" EMC2-3/16 EMC3-3/16 EMC4-3/16
13/64" 5/8" 2-1/2" EMC2-13/64 EMC3-13/64 EMC4-13/64
7/32" 5/8" 2-1/2" EMC2-7/32 EMC3-7/32 EMC4-7/32
15/64" 3/4" 2-1/2" EMC2-15/64 EMC3-15/64 EMC4-15/64
1/4" 3/4" 2-1/2" EMC2-1/4 EMC3-1/4 EMC4-1/4
17/64" 7/8" 2-1/2" EMC2-17/64 EMC3-17/64 EMC4-17/64
9/32" 7/8" 2-1/2" EMC2-9/32 EMC3-9/32 EMC4-9/32
19/64" 7/8" 2-1/2" EMC2-19/64 EMC3-19/64 EMC4-19/64
5/16" 7/8" 2-1/2" EMC2-5/16 EMC3-5/16 EMC4-5/16
21/64" 7/8" 2-1/2" EMC2-21/64 EMC3-21/64 EMC4-21/64
11/32" 7/8" 2-1/2" EMC2-11/32 EMC3-11/32 EMC4-11/32
23/64" 7/8" 2-1/2" EMC2-23/64 EMC3-23/64 EMC4-23/64
3/8" 7/8" 2-1/2" EMC2-3/8 EMC3-3/8 EMC4-3/8
25/64" 7/8" 2-1/2" EMC2-25/64 EMC3-25/64 EMC4-25/64
13/32" 7/8" 2-1/2" EMC2-13/32 EMC3-13/32 EMC4-13/32
27/64" 7/8" 2-1/2" EMC2-27/64 EMC3-27/64 EMC4-27/64
7/16" 1" 2-1/2" EMC2-7/16 EMC3-7/16 EMC4-7/16
29/64" 1" 3" EMC2-29/64 EMC3-29/64 EMC4-29/64
15/32" 1" 3" EMC2-15/32 EMC3-15/32 EMC4-15/32
31/64" 1" 3" EMC2-31/64 EMC3-31/64 EMC4-31/64
1/2" 1" 3" EMC2-1/2 EMC3-1/2 EMC4-1/2
33/64" 1-1/4" 3-1/2" EMC2-33/64 EMC3-33/64 EMC4-33/64
17/32" 1-1/4" 3-1/2" EMC2-17/32 EMC3-17/32 EMC4-17/32
35/64" 1-1/4" 3-1/2" EMC2-35/64 EMC3-35/64 EMC4-35/64
9/16" 1-1/4" 3-1/2" EMC2-9/16 EMC3-9/16 EMC4-9/16
37/64" 1-1/4" 3-1/2" EMC2-37/64 EMC3-37/64 EMC4-37/64
19/32" 1-1/4" 3-1/2" EMC2-19/32 EMC3-19/32 EMC4-19/32
39/64" 1-1/4" 3-1/2" EMC2-39/64 EMC3-39/64 EMC4-39/64
5/8" 1-1/4" 3-1/2" EMC2-5/8 EMC3-5/8 EMC4-5/8
41/64" 1-1/2" 4" EMC2-41/64 EMC3-41/64 EMC4-41/64
21/32" 1-1/2" 4" EMC2-21/32 EMC3-21/32 EMC4-21/32
43/64" 1-1/2" 4" EMC2-43/64 EMC3-43/64 EMC4-43/64
11/16" 1-1/2" 4" EMC2-11/16 EMC3-11/16 EMC4-11/16
45/64" 1-1/2" 4" EMC2-45/64 EMC3-45/64 EMC4-45/64
23/32" 1-1/2" 4" EMC2-23/32 EMC3-23/32 EMC4-23/32
47/64" 1-1/2" 4" EMC2-47/64 EMC3-47/64 EMC4-47/64
3/4" 1-1/2" 4" EMC2-3/4 EMC3-3/4 EMC4-3/4
49/64" 1-1/2" 4" EMC2-49/64 EMC3-49/64 EMC4-49/64
25/32" 1-1/2" 4" EMC2-25/32 EMC3-25/32 EMC4-25/32
51/64" 1-1/2" 4" EMC2-51/64 EMC3-51/64 EMC4-51/64
13/16" 1-1/2" 4" EMC2-13/16 EMC3-13/16 EMC4-13/16
53/64" 1-1/2" 4" EMC2-53/64 EMC3-53/64 EMC4-53/64
27/32" 1-1/2" 4" EMC2-27/32 EMC3-27/32 EMC4-27/32
55/64" 1-1/2" 4" EMC2-55/64 EMC3-55/64 EMC4-55/64
7/8" 1-1/2" 4" EMC2-7/8 EMC3-7/8 EMC4-7/8
57/64" 1-1/2" 4" EMC2-57/64 EMC3-57/64 EMC4-57/64
29/32" 1-1/2" 4" EMC2-29/32 EMC3-29/32 EMC4-29/32
59/64" 1-1/2" 4" EMC2-59/64 EMC3-59/64 EMC4-59/64
15/16" 1-1/2" 4" EMC2-15/16 EMC3-15/16 EMC4-15/16
61/64" 1-1/2" 4" EMC2-61/64 EMC3-61/64 EMC4-61/64
31/32" 1-1/2" 4" EMC2-31/32 EMC3-31/32 EMC4-31/32
63/64" 1-1/2" 4" EMC2-63/64 EMC3-63/64 EMC4-63/64
1" 1-1/2" 4" EMC2-1 EMC3-1 EMC4-1


* For coated endmills, add the appropriate designation shown below to the end of the part numbers listed above;

-TIN A general purpose coating offering wear resistance and reduced friction. Can provide up to 4 times the tool life at 2 times the machining rate vs uncoated.

-TICN High abrasion resistance, lower friction and 80% harder than TIN coating but with a lower temperature threshold. Can provide 2 to 4 times the tool life over TIN.

-ALTIN Has the highest temperature resistance while maintaining a high degree of surface hardness. Best choice for dry machining. A good choice for titanium & stainless alloys, inconel, and cast iron.