Internal Rotary Broach Set Up Tool Gage




Using this gage will allow you to center your broach tool in minutes.

To order:
Match the broach shank diameter and broach length of the broach currently using with the corresponding catalog number shown in the chart.

BROACH LENGTH OF    
SHANK O.D. BROACH CAT. NO. A
.315 (8MM) 28MM (1.103") CPSW-1.103 .156
.315 (8MM) 1-1/4" CP00-1.25 .156
.315 (8MM) 1-1/2" CP00-1.50 .156
.315 (8MM) 2" CP00-2.00 .156
.500 1-1/2" CP2-1.50 .250
.500 1-3/4" CP2-1.75 .250
.500 2" CP2-2.00 .250
.500 2-1/4" CP2-2.25 .250
.500 2-1/2" CP2-2.50 .250
.500 2-3/4" CP2-2.75 .250
.500 3" CP2-3.00 .250
.750 2-1/2" CPHD-2.50 .250
.750 2-3/4" CPHD-2.75 .250