IS-63

Instruction Sheet for Scissors Knurl Tool Holders SKT-30-F, SKT-30-R, SKT-50-F, SKT-50-R for 30mm and 50mm Center Height CNC Machines


  1. ADJUST SPACE BETWEEN KNURLS "B" BY ROTATING PART NO. 10 CENTER ADJUSTING SCREW SO THAT IT IS SLIGHTLY LARGER THAN THE DIAMETER TO BE KNURLED.

  2. ADJUST PART NO. 7 CENTER ADJUSTING SCREW SO THAT LOWER KNURL IS CLOSE BUT NOT QUITE TOUCHING THE DIAMETER TO BE KNURLED.

  3. WITH PART ROTATING READJUST PART NO. 10 SCREW UNTIL THE DESIRED DEPTH OF KNURL IS ATTAINED.

  4. LOCK THESE SETTINGS IN PLACE BY TIGHTENING LOCKING SCREWS PART NO. 8 AND 11.

IN THIS WAY KNURL ARMS WILL LIFT SLIGHTLY AS THEY ADVANCE ONTO THE WORK PIECE.