STC-TAP-ER


STC-TAP-ER Tapping Machine




Standard Part No.
STC-TAP-ER
HEAVY DUTY TAPERED CONE DRIVE TAPS UP TO 5/16-18 THREAD IN 1/2" STEEL!!

FEATURES:
• Push to tap in
• Pull to tap out
• Sliding face plate
• Easy to set stop for tap depth control
• Comfortable bench height working area
• Long lasting tapered cone drive
• Pilot light switch warns if motor left running

1/2" capacity chuck
1/3 H.P., 115V, Single Phase
1725 RPM, A48 Frame Motor*
Weight 43 lbs

The STC-TAP-ER has a double disc friction drive that reverses rotation instantly by the application of forward or backward hand pressure on the part being tapped. The friction discs are driven by a heavy duty tapered cone drive collar mounted on the motor shaft. The maximum spindle speed is 300 RPM.

ORDERING NO. CONFIGURATION
STC-TAP-ER STANDARD AS SHOWN
STC-TAP-ER(-) MINUS THE FRONT STAGING
STC-TAP-ER/MAGNETIC WITH MAGNETIC START
STC-TAP-ER-3/4CAP WITH 3/4" CAPACITY CHUCK
STC-TAP-ER KEYLESS WITH KEYLESS CHUCK
STC-TAP-ER-F/R WITH FORWARD-REVERSE SWITCH
STC-TAP-ER-VAR/RPM WITH VARIABLE SPINDLE SPEED CONTROL
STC-TAP-ER-380/3 WITH 380V 50HZ 3 PHASE MOTOR

WARNING!! TO AVOID INJURIES, WORKPIECE SHOULD BE HELD IN AN APPROPRIATE CLAMPING DEVICE WHILE BEING TAPPED AND SHOULD NEVER BE HELD BY HAND WITHOUT ADEQUATE PROTECTION.

Replacement Parts

CAT. NO. DESCRIPTION
BB-TAP-6 SPINDLE CONE ASSEMBLY