T-Type Cut-Off Blades Carbide Tipped

• Micrograin - Increased feeds, shock resistant for interrupted cuts
• C2 Carbide - Heat and wear resistant, for cast iron & non-ferrous metals and plastics


Download the Carbide Tipped Blade Resharpening Procedures



				DOUBLE END
				MICROGRAIN	SINGLE END C2
REF. NO.	WIDTH	HEIGHT	LENGTH	ORDERING#	ORDERING#
P-1-N	.040	1/2	3-1/2"	CTBL332	CTBL332-SE
P-1	1/16	1/2	4-1/2"	CTBL432	CTBL432-SE
P-2-N	5/64	1/2	4-1/2"	CTBL532	CTBL532-SE
P-2	3/32	1/2	4-1/2"	CTBL632	CTBL632-SE
P-3-S	1/8	1/2	4-1/2"	CTBL832	CTBL832-SE
P3N-866	1/16	11/16	5"	CTBL444	CTBL444-SE
	5/64	11/16	5"	CTBL544	CTBL544-SE
P-3-N	3/32	11/16	5"	CTBL644	CTBL644-SE
P-3	1/8	11/16	5"	CTBL844	CTBL844-SE
P-4	5/32	11/16	5"	CTBL1044	CTBL1044-SE
P-5-S	3/16	11/16	5"	CTBL1244	CTBL1244-SE
P-3-W	1/8	3/4	5"	CTBL848	CTBL848-SE
P-4-W	5/32	3/4	5"	CTBL1048	CTBL1048-SE
P-5-W	3/16	3/4	5"	CTBL1248	CTBL1248-SE
P-5-X	1/8	7/8	6"	CTBL856	CTBL856-SE
P-5-N	5/32	7/8	6"	CTBL1056	CTBL1056-SE
P-5	3/16	7/8	6"	CTBL1256	CTBL1256-SE
P-6	1/4	7/8	6"	CTBL1656	CTBL1656-SE
P-8-X	1/8	1-1/8	6-1/2"	CTBL872	CTBL872-SE
P-8-N	5/32	1-1/8	6-1/2"	CTBL1072	CTBL1072-SE
P-8	3/16	1-1/8	6-1/2"	CTBL1272	CTBL1272-SE
P-9	1/4	1-1/8	6-1/2"	CTBL1672	CTBL1672-SE
P-10	5/16	1-1/8	6-1/2"	CTBL2072	CTBL2072-SE


CUT-OFF BLADE COATING OPTIONS:
(FOR THE OPTIONS LISTED, ADD THE SUFFIX LISTED BELOW TO THE ORDERING NUMBER)

• TIN = A GOOD GENERAL PURPOSE COATING FOR METAL CUTTING
• TICN = THIS COATING IS RECOMMENDED FOR MACHINING HIGH CARBON STEEL, HIGH SILICON ALUMINUMS AND TOOL STEELS
• TIALN = FOR MACHINING CAST IRON, HIGH NICKEL AND TITANIUM ALLOYS, HARDENED STEELS AND STAINLESS STEELS. GOOD CHOICE FOR INTERRUPTED APPLICATIONS
• ALTIN = HIGH HEAT RESISTANCE, LONGER TOOL LIFE WITH HARDER MATERIAL AND NICKEL ALLOY. CAN BE RUN AT HIGHER RPM/SPM. BEST OPTION IF RUNNING DRY WITHOUT COOLANT.

** MANY MORE SPECIALIZED COATINGS AVAILABLE **

Micro-Grain Carbide Tipped / Short Length
T-Type Cut-Off Blades