Bar Puller for CNC Lathes

Bar Puller for CNC Lathes

Bar Puller for CNC Lathes - Diagram

  • BP00, BP1, BP2, BP3 AND BP4 ARE ADJUSTABLE TO PULL BARS RANGING FROM 1/16 DIA MIN TO UP TO 2-1/2" DIA MAX.
  • BP5 IS ADJUTABLE TO PULL BARS RANGING FROM 1/16 DIA MIN TO UP TO 3" DIA MAX.
  • AVAILABLE IN VARIOUS SHANK SIZES TO FIT ALL MACHINES
  • NO SPRINGS - TENSION BUILT INTO JAWS FOR UP TO 250 LBS. PRESSURE
  • JAWS ARE EASILY REPLACED
EASY TO ADJUST:
  • SCREW JAWS DOWN TO SLIP FIT ON BAR
  • BACK OFF BAR
  • ADJUST BOTH JAWS DOWN 1/4 TURN
  • LOCK IN PLACE AND PULLER IS READY TO USE
  • PRESSURE CAN BE INCREASED OR DECREASED BY ADJUSTING JAWS IN OR OUT
CAT. NO. "D" "L"
BP00 5/8" DIA. 2"
BP1 3/4" DIA. 2"
BP2 1" DIA. 2-5/8"
BP3 1-1/4" DIA. 2-5/8"
BP4 1-1/2" DIA. 2-5/8"
BP5 2" DIA. 3-5/16"
BAR PULLER PARTS
PART NO. CAT. NO.
1. Shank 3/4" DIA. BP1-1
1. Shank 1" DIA. BP2-1
1. Shank 1-1/4" DIA. BP3-1
1. Shank 1-1/2" DIA. BP4-1
1. Shank 2" DIA. BP5-1
2. Body BP4-2
2. Body (for BP5 only) BP5-2
3. Slide BP4-3
4. Jaw BP4-4
6. Slide Clamp Screw & Washer VFDH0-5
8. Jaw Screw BP4-8
9. Clamp Screw & Washer FDH2-4
11. Adjusting Screw BP4-11